关键词req
标准
为您共找出"500+"个相关器件
图片 型号 厂商 标准 分类 描述
Image: RFXF0007 RFXF0007 RF Micro Devices 无源元器件 RF 功率分配器/分线器 the rfxf0007 transformer is designed for applications that require small,
Image: WCT1101DS WCT1101DS NXP Semiconductors 集成电路 嵌入式 - 微控制器 the wct1101 is a wireless power transmitter controller that integrates all required functions for wpc “Qi” compliant wireless power transmitter design
Image: A2T18S162W31S A2T18S162W31S NXP Semiconductors 半导体 RF 晶体管 (BJT) these 32 W RF power ldmos transistors are designed for cellular basestation applications requiring very wide instantaneous bandwidth capability covering the frequency range of 1805 to 1880 mhz.
Image: AFT21H350W03S AFT21H350W03S NXP Semiconductors 半导体 RF 晶体管 (BJT) these 63 watt asymmetrical doherty RF power ldmos transistors are designed for cellular base station applications requiring very wideinstantaneous bandwidth capability covering the frequency range of 2110 to2170 mhz
Image: PCA9629A PCA9629A NXP Semiconductors 集成电路 接口 - 模块 the pca9629a is an i2c-bus controlled low-power cmos device that provides all the logic and control required to drive a four phase stepper motor.
Image: PCA9541A PCA9541A NXP Semiconductors 集成电路 接口 - 模块 the pca9541a is a 2-to-1 i2c-bus master selector designed for high reliability dual master i2c-bus applications where system operation is required, even when one master fails or the controller card is removed for maintenance
Image: Si5374 Si5374 Silicon Laboratories Inc 集成电路 时钟/计时 - 时钟发生器，PLL，频率合成器 the si5374 is a highly-integrated, 4-pll, jitter-attenuating precision clock multiplier for applications requiring sub-1 ps jitter performance
Image: Si5375 Si5375 Silicon Laboratories Inc 集成电路 时钟/计时 - 时钟发生器，PLL，频率合成器 the si5375 is a highly-integrated, 4-pll, jitter-attenuating precision clock multiplier for applications requiring sub 1 ps jitter performance
Image: Si5376 Si5376 Silicon Laboratories Inc 集成电路 时钟/计时 - 时钟发生器，PLL，频率合成器 the si5376 is a highly-integrated, 4-pll, jitter-attenuating precision clock multiplier for applications requiring sub-1 ps jitter performance
Image: CAV4109 CAV4109 ON Semiconductor 嵌入式解决方案 评估板 -  LED 驱动器 the cat4109/cav4109 is a 3−channel constant−current led driver, requiring no inductor. led channel currents up to 175 mA are programmed independently via separate external resistors.
Image: MAX77231 MAX77231 Maxim Integrated 电源 电源管理 IC optimized for boost applications, requiring very low ripple/noise and small pcb space
Image: 1210 1PSI 1210 1PSI TE Connectivity 传感器，变送器 压力传感器 the 1210 1psi is a temperature compensated,piezoresistive silicon pressure sensor packaged in a dual-in-lineconfiguration. It is intended for cost sensitive applications whereexcellent performance and long-term stability are required.
Image: MAX20743 MAX20743 Maxim Integrated 电源 DC/DC 转换器与调节器 the max20743 is a fully integrated, highly efficient switching regulator with pmbus™ for applications operating from 4.5V to 16v and requiring up to 35a maximum load.
Image: MAX20730 MAX20730 Maxim Integrated 电源 电源管理 IC the max20730 is a fully integrated, highly efficient switching regulator with pmbus™ for applications operating from 4.5V to 16v and requiring up to 25a (max) load.
Image: MAX20733 MAX20733 Maxim Integrated 电源 电源管理 IC the max20733 is a fully integrated, highly efficient switching regulator for applications operating from 4.5V to 16v and requiring up to 35a maximum load.
Image: 200136G 200136G Skyworks Solutions Inc 无源元器件 电容器 systems requiring DC blocking or RF bypassing
Image: SE-VS1002K SE-VS1002K Littelfuse Inc 机电产品 工业控件 In some SE-325 ngr monitor applications the required res trip level (vac) setting may be above the 20k res set-point range.
Image: AKT4R111100 AKT4R111100 Panasonic 测试和测量 控制器 - 处理，温度 operation startup can begin after using initial setting mode to enter the control values required before first use, and after entering values for items such as frequently used and frequently changed settings. smooth operation is enabled at initial startup and after changing settings.
Image: PS-BK PS-BK 3M 附件 锁定，扣锁 with panelsafe, 3M is dedicated to helping you meet applicable osha regulations, which require all electrical circuits to be “locked out” prior to the servicing and maintenance of machines, lighting and equipment.
Image: PB1212PP PB1212PP ETC 附件 机架配件 use this enclosure in commercial and general industrial applications that require a junction or pull box

©2000-  21IC电子网版权所有

京ICP备11013301号 京公网安备 11010802024343号